Translogik Integration for Tread Depth Probes
The TyreOps Translogik integration sends every tread depth and pressure reading from your Translogik probe straight into TyreOps. Measurements land against the right vehicle and tyre position automatically, with no clipboards, no double entry and no transcription errors.
Set Up the Translogik Integration in Three Steps
01 | Pair Your Probe
Connect your Translogik tread-depth probe to TyreOps over Bluetooth. Pairing takes seconds and readings start flowing the moment you scan a tyre.
02 | Measure Every Tyre
Walk the vehicle and take a reading on each tyre. Translogik captures tread depth and pressure while TyreOps tags every figure to the correct axle and wheel position.
03 | Readings Post Automatically
Every measurement lands on the vehicle’s inspection in TyreOps in real time, ready for reports, wear tracking, reminders, and DVSA-ready compliance records.
Tread Depth Probe Data, Straight Into Your Records
Zero Manual Entry
Tread depth and pressure readings flow from the Translogik probe straight into TyreOps. Your fitters stop scribbling numbers on a clipboard and re-keying them later. Every figure is captured once, right at the tyre.
Accurate Every Time
Electronic probes remove the guesswork and transcription errors of manual gauges. Readings are precise and stamped against the exact wheel position, so your inspection records stand up to scrutiny.
Wear Trends at a Glance
With every reading captured digitally, TyreOps tracks tread wear over time for each vehicle and wheel position, so you can predict replacements and flag fast-wearing tyres before they fail.
Position-Perfect Records
Each reading maps to the correct axle and wheel position on the vehicle in TyreOps. No more ambiguity about which tyre a measurement belongs to, even on multi-axle fleet vehicles.
Compliance Made Simple
Digital tread and pressure records give you a time-stamped audit trail for every inspection, ideal for fleet DVSA compliance, earned recognition, and clear customer reports.
Faster Forecourt Checks
Bluetooth capture means a full tread and pressure check takes a fraction of the time of manual gauges. Get vehicles measured, logged, and back on the road faster.
What Flows From Your Translogik Probe
A transparent view of the data the Translogik integration moves from your probe into TyreOps.
| Data Type | Auto Sync | Manual Trigger | Direction |
|---|---|---|---|
| Tread Depth Readings | ✓ | No | Translogik → TyreOps |
| Tyre Pressure Readings | ✓ | No | Translogik → TyreOps |
| Wheel / Axle Position | ✓ | No | Translogik → TyreOps |
| Measurement Timestamp | ✓ | No | Translogik → TyreOps |
| Probe Device ID | ✓ | No | Translogik → TyreOps |
| Low-Tread Alerts | ✓ | No | Translogik → TyreOps |
| Vehicle Registration Match | ✓ | No | Translogik → TyreOps |
| Historical Reading Import | No | ✓ | Translogik → TyreOps |
Learn how TyreOps handles digital inspections and job management that these readings feed into.
Translogik Integration FAQs
What data does the Translogik integration capture?
Tread depth and tyre pressure readings, the wheel position for each measurement, the probe’s device ID, and a timestamp. Every figure is matched to the correct vehicle and inspection in TyreOps automatically.
Is the Translogik integration useful for fleet tyre operations?
Very. Digital tread and pressure capture gives fleet operators a consistent, time-stamped record for every vehicle, ideal for DVSA compliance, earned recognition, and spotting fast-wearing tyres before they cause downtime.
Which Translogik devices are supported?
TyreOps works with Translogik’s Bluetooth-enabled tread depth probes and pressure gauges. Readings pair over Bluetooth and post straight to the vehicle’s inspection, with no cables and no manual export.
Does the Translogik integration need any technical setup?
No. Pairing is done in the TyreOps app in a few taps. Once your probe is connected, readings flow automatically. There is nothing to configure and no manual export or import.
Can I still enter readings manually?
Yes. Manual tread and pressure entry is always available in TyreOps. The Translogik integration simply removes the keying step: your team measures with the probe and the numbers appear on the inspection instantly.
Ready to Run Your Tyre Business on TyreOps?
